Wen 3914 Manuale di Manutenzione e Cura

OPERATOR’S MANUAL14" Band Saw Model # 3914

WARNING: For your own safety, read the instruction manual before operating the band saw. 1. Wear eye protection. 2. Do not wear gloves, necktie

86 796 Base 7 Left panel 8 Right panel 9 Door assembly 10 Rear panel 11 Brace (2) 12 Shelf Parts bag includes: Handwhe

Assembly CAUTION: Do not attempt assembly if parts are missing.Use this manual to order replacement parts. WARNING: To avoid injury, do not attemp

Centering the table 1. Loosen the hex bolts mounting the trunnion to the saw frame (see Figure 1). 2. Move the table sideways as required, until

14 Attach pRefer to F1. Threaof ho2. Threa3. Tight4. Store Attach d Refer to 1. Place2. Secur Stabilize The machworktablthispurpomachine’

Changing and adjusting the saw blade This band saw is factory-equipped with a general-purpose,woodcutting blade; the saw blade is set prior to deli

Setting the cutting height Figure 8 Locking Knob Guidepost-Adjusting Knob 1. The upper blade guide should be set as close as is practically necess

Adjusting the rip fence The locking pressure of the rip fence has been factory-set. The fence handle has a cam action, press down thehandle to cla

BLADE SELECTION 1. Blades vary depending on type of material, size of workpiece and type of cut that is being performed. 2. Characteristics which

CONTOUR SAWING 1. When contour sawing, use both hands to keep workpiece flat against table and guided along desired path. 2. Avoid positioning ha

2

Operation ON/OFF Switch(Figure 14) 1. To turn the saw ON, move the switch to the up (ON) position. 2. To turn the saw OFF, move the switch to

Cutting Curves When cutting curves, carefully turn the work piece so the blade follows without twisting. If the curve is so sharp that you repeate

Exploded view and parts list 22

Item # Stock # Description Item # Stock # Description 1 3914-101 Lower Door Assembly 28 3914-128 Wing Nut 2 3914-102 Upper Door Ass

 24

Item # Stock # Description Item # Stock # Description 1 3914-201 Tap Screw 34 3914-234 Locking Handle 2 3914-202 Plate 35 3914-2

Item # Stock # Description Item # Stock # Description 1 3914-301 Left Panel 8 3914-308 Screw 2 3914-302 Brace 9 3914-309 Flat

27 Limited two years warranty WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this comm

Table of Contents Technical data ...

General safety rules Safety is a combination of common sense, staying alert and knowing how your band saw works. SAVE THESE SAFETY INSTRUCTIONS.

13. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch to OFF. Do not leave the tool until it has come to a complete stop. 14. NEVER STA

Specific safety rules for band saws  1. To avoid injury from unexpected movement, make sure the saw is on a firm, level surfaceand secured proper

16. Don’t leave the work area until all moving parts have stopped. Shut off the power to master switches. Remove the switch key from the band saw an

Guidelines for Using Extension Cords Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy en

 Know your band saw 2 1 Switch 2 Blade-tension-adjusting knob 3 Blade 4 Work table 5 Blade tension wheel 6 Storage 7 Rip fenc